1. Label size setting
The label size setting of the labeling machine is very important, once the setting is not accurate, it may cause the label to not be applied or applied firmly. Generally speaking, the label size setting needs to be matched to the mold of the labeling machine, so as to ensure that the label is applied to a better effect. When setting the label size, you need to pay attention to the following points:
1. Measure the actual size of the label to avoid labeling errors.
2. Confirm the size setting of the labeling machine and make sure it matches with the blanking equipment or other equipment.
Second, the speed setting
The speed setting of the labeller is also very important, as it will directly affect the accuracy and efficiency of label application. In general, the speed setting needs to be adjusted according to actual needs, but it is important to pay attention to the following points:
1. Determine the range of speed settings based on the size, quality, and stickiness of the label.
2. Try to ensure the accuracy at the same time, to control the speed reasonably, to avoid too fast or too slow situation.
3. Strength setting
The force setting of the labeling machine is also very important, it will directly affect the fitting effect and the strength of the label. If the force is too high, it may cause the label to deform; If the force is too low, there is a risk that the label will fall off. Therefore, you need to pay attention to the following points when setting the force:
1. Determine the setting range of the strength according to the material, size and quality of the label.
2. When adjusting the strength, it is necessary to pay attention to the influence of the change of strength on the effect of label application.
Fourth, the distance setting
The distance setting of the labeling machine is also very important, as it will directly affect the fitting effect and accuracy of the label. Therefore, when setting the distance, you need to pay attention to the following points:
1. According to the size, shape and quality of the label, determine the setting range of the distance.
2. When adjusting the distance, you need to pay attention to the influence of the change of distance on the label fitting effect.
