First, the adjustment method of marking speed
The marking speed has a great influence on the quality of the mark, and in general, the faster the marking, the lower the mark quality. Therefore, it is necessary to pay special attention to adjust the marking speed. The specific adjustment method is as follows:
1. Set different marking speed values for testing.
2. Choose the appropriate marking speed, observe the marking quality and marking time.
3. If the marking quality is affected, the marking speed can be reduced. If you need more speed, you can increase the power appropriately.
Second, the power adjustment method
Power is the main parameter for adjusting the quality of the marker. If the power is not set properly, it will affect the clarity and stability of the mark. The specific adjustment method is as follows:
1. Set different power values and observe the quality of the markers.
2. Choose the most suitable power value, and at the same time pay attention to the power too high will affect the marking time and the stability of the marking.
3. If you need more power, you can add the cooling system.
3. Frequency adjustment method
Frequency is another important parameter of UV laser marking machine. The higher the frequency, the faster the marking, but the quality of the marking may be affected. The specific adjustment method is as follows:
1. Choose different frequency values for testing.
2. Observe the quality and speed of the marking.
3. Choose the most suitable frequency, and at the same time pay attention to the frequency that is too high may affect the life of the marking machine.
Fourth, the adjustment method of other parameters
In addition to the above three main parameters, the UV laser marking machine also has other parameters that need to be adjusted, such as: focus length, focus depth, and so on. The specific adjustment method is as follows:
1. Understand the role and impact of each parameter.
2. Adjust the individual parameters and observe the quality and efficiency of the markers.
3. Make adjustments as needed, while taking care to avoid problems in the adjustment process.