First, the operation steps
1. Preparation: Place the self-adhesive labeling machine on a stable workbench and plug in the power supply. Check whether the power cord of the machine is firmly connected and whether the device is in normal working condition.
2. Adjust the label: According to the size and requirements of the product, select the appropriate label and place it on the label holder of the labeling machine. Make sure the label is securely fastened and will not come loose or deviate.
3. Adjust the applicator head: Adjust the height and angle of the applicator head according to the size and shape of the product. Make sure that the applicator head fits snugly to the surface of the product to avoid bubbles or poor clutch.
4. Adjust the conveyor belt: Adjust the speed of the conveyor belt to the appropriate position to ensure the continuous conveying of the product and the ability to complete the labeling in the right position.
5. Start the operation: Place the product on the conveyor belt and start the labeling machine. The labeler automatically pulls the label out of the label holder and applies it precisely to the surface of the product. In the process of labeling, it is necessary to ensure the smooth conveyance of the product to avoid clogging or jamming.
6. Check the quality of the labeling: After the labeling is completed, check the quality of the labeling in time to ensure that there are no problems such as misalignment, bubbles or damage.
7. Troubleshooting: If there is a failure or the labeling is not smooth during the operation, it is necessary to stop the machine for inspection in time. Often, the fault can be caused by a loose label holder, a belt speed that is too fast, or an improperly adjusted labeling head.
8. Cleaning and maintenance: After the operation is completed, the labeling machine should be cleaned and maintained. Clean the applicator head and conveyor belt to keep the equipment clean and tidy.
