1. It can process all kinds of metal and non-metal materials, especially marking materials with high hardness, high melting point and brittleness.
2. It belongs to non-contact processing, does not damage the product, no tool wear, and has good marking quality.
3. The laser beam is fine, the processing material consumption is small, and the processing heat affected zone is small.
4. High processing efficiency, computer control, easy to achieve automation.
Laser marking machines are used for graphic and text marking in IC chips, computer accessories, industrial bearings, clocks and watches, electronic and communication products, aerospace devices, various auto parts, household appliances, hardware tools, molds, wires and cables, food packaging, jewelry, tobacco, military and many other fields, as well as mass production line operations. How to clean and maintain the laser marking machine?
1. Water change and water tank cleaning of the laser marking machine: clean the water tank of the laser marking machine once a week and replace the circulating water, but before the laser marking machine starts working, make sure that the laser tube is filled with circulating water. The water quality and temperature of the circulating water of the laser marking machine directly affect the service life of the laser tube. It is recommended to use purified water, and the water temperature is controlled below 32. If it exceeds 32.Replace the circulating water or add ice to the water to lower the water temperature. The water tank of the laser marking machine should be cleaned regularly.
2. Clean the fan of the laser marking machine: The fan is used for a long time, and the ultraviolet laser marking may accumulate a lot of impurities and dust in the fan, which will make the fan produce a lot of noise, which is not conducive to exhaust and odor removal. When the suction power of the fan of the laser marking machine is insufficient and the smoke exhaust is not smooth, please turn off the power, deal with the dust on the inlet and outlet ducts of the fan, turn the fan upside down, and pull the blades inward until it is clean. After that, install the fan.
3. Clean the lens of the laser marking machine: After the laser marking machine is turned off, it should be cleaned before work every day. Laser marker lenses are susceptible to dust or other contaminants, resulting in laser wear and tear or lens damage. To clean laser marker lenses, you need to remove the lenses and carefully wipe them with lens paper dipped in cleaning solution along the center to the edge of the lens in a rotating manner. It is worth noting that when wiping the lens of the laser marking machine, it should be handled with care and wiped gently. When attaching the focusing lens, keep the concave side facing down.